Exploring the Cubidi Magic Snake's Endless Configurations: Tips for Creating Never-Ending Shapes

Cubidi magic snake is a popular puzzle toy that can be manipulated into various shapes. Mastering the art of playing with the Cubidi magic snake requires practice and patience. Here are some tips to improve your skills and enjoy this brain-teasing game even more. Firstly, it is important to familiarize yourself with the basic structure of the Cubidi magic snake. It consists of several connected triangular prisms that can rotate and move. By understanding how these prisms are connected, you will have a better understanding of how the snake can be transformed into different shapes.

By understanding how these prisms are connected, you will have a better understanding of how the snake can be transformed into different shapes. Next, start by experimenting with simple formations. Begin by creating basic shapes like squares, rectangles, and triangles.

What type of oil do I use to lubricate a bit for drilling metal?

I’d be using the bit to drill out spot welds and also for hole saws into sheet metal. Is there anything specific sold at Lowes or Home Depot that will work?

matt_i

Well-known member

You can use literally anything petroleum based. Even vegetable and animal oils will work but can get rancid.

I like Tap Magic, has a convenient dropper bottle but I've never seen it at the box store.

cvairwerks

Well-known member

lbhsbz

Well-known member

I’d be using the bit to drill out spot welds and also for hole saws into sheet metal. Is there anything specific sold at Lowes or Home Depot that will work?

I use thread cutting oil found in the plumbing section at Home Depot/Lowes. Works great on steel. On aluminum, use WD-40.

SteveCh

Well-known member

Over the years, I've grabbed whatever was handy. 3-in-1, motor oil, gun oil, etc. and it has always worked fine. I don't have anything against official cutting oil, I just often don't seem to have it when I need it.

firebird1999us

Well-known member

larry_g

Well-known member

I use thread cutting oil found in the plumbing section at Home Depot/Lowes. Works great on steel. On aluminum, use WD-40.

X2 on this. Use a cutting oil, not a lubricating oil, they are different.

lg
no neat sig line

Ilikeike

I have cutting oil next to the drill press,
but I'll grab any oil thats handy to keep the bit cool a lubricated, WD, penetrating oil, or even air tool oil if I'm close to it.

sberry

Banned

I need to get another can of tap magic but holesawed these with battery drill and water. 2 additional close tolerance bolts each side. I might have been able to get 7/8 in the original holes or even put fine thread larger bolts in but I liked to keep them the same and simple and added 2 more bolts to each mount and they haven't worked loose since.

Attachments

jeepinerdeep

Well-known member

I've tried about 4 or 5 and have settled on CRC Truetap. It's got a little stickiness to it that works great.

I dunno about the box stores, but I get it on Amazon, and the bottle lasts several years.

Ty.

Well-known member

I've been using heavy gear oil because I have half a bottle of it that I wouldn't use for anything else. I like it because it's thick and stays where you put it, and to me I feel like my old oil squirter looses its prime less with the thicker oil.

2ndGearRubber

Well-known member

I'm all about tap-magic. I used to be a "anything is better than nothing" guy, but the correct cutting oil makes a huge difference. Obviously speed/feed is tough to control with a hand drill in an akward position, so I'll take all the help I can get.

seber

Well-known member

Any oil will work most of the time but for really tough jobs i reach for sulfer oil. I don't use it for everything because I haven't seen it for sale in years.

Steve_P

Well-known member

For drilling I use the Oatey pipe thread cutting oil from Home Depot. It's cheap, works well, and pipe cutting oils have a distinctive smell
For tapping, Tap Magic

Super Mech

Well-known member

PoorOwner

Well-known member

Oatey thread cutting oil, but I think they are cheating us with that one, because it smells just like 75W90 gear oil..

Ign

Well-known member

I use thread cutting oil found in the plumbing section at Home Depot/Lowes. Works great on steel. On aluminum, use WD-40.

This. I buy the least expensive gallon of thread cutting oil and keep some at each machine in Spill Master cups w acid brushes. Spill Master best thing ever, knock the cup to the floor and no crying over spilt mil. er oil

kctyphoon

Banned

danielbuck

Well-known member

I use whatever is handy. I think it's more important to use SOMETHING, rather than nothing, particularly for drilling thick steel where the bit gets hot. I generally use inexpensive cutting oil, but really anything will work decently. I've even heard of folks using lard.

plinker

Well-known member

I use the Norseman Ultra S/P mainly for tapping but sometimes drilling. Very good stuff.
https://www.harryepstein.com/index.php/ultra-lube-metal-cutting-lubricant.html

Rustlik is a water mixable cutting fluid, ratios can vary but it was decent stuff.
https://www.zoro.com/rustlick-coolant-1-gal-bottle-75014/i/G1114102/

MushCreek

Well-known member

I machine metal for a living, and we usually are cutting tools steels (tough!) Dark cutting oil works well. WD-40 for aluminum. There are various tapping fluids for tapping. We have some extra-thick stuff for tapping; about the consistency of honey. Messy, but works well for the very toughest tapping jobs. As said, anything is better than nothing. Warning- vegetable oil will leave you craving french fries. If you have metal cutting bits, you should have some cutting oil in the shop.

Rj555

Active member

Penzoil. best cutting oil around. Sarcasm, maybe.

In the oil can now I have Rotella 30 weight oil, because it was close, open, and handy.

seber

Well-known member

I use whatever is handy. I think it's more important to use SOMETHING, rather than nothing, particularly for drilling thick steel where the bit gets hot. I generally use inexpensive cutting oil, but really anything will work decently. I've even heard of folks using lard.

Lard oil is one of the oldest and best cutting oils, but is another one of those that can no longer be found.

Wyoming09

Well-known member

I like the Union Butterfield stuff. It's thick and stays in place especially when doing vertical work.

Attachments

bwringer

Well-known member

With the stipulation of "available in big box home stores" the pipe thread cutting oil is about it.

Anything is better than nothing, true. But specialty fluids do seem to work a bit better.

I have a bottle of Tap Magic, and it definitely works better than motor oil or WD-40. They make several fluids for different metals and situations, but the one I have is the "universal" stuff for any metal. I found it locally at a race shop, but most people will need to order from the Brazilian River or similar.

bwringer

Well-known member

Lard oil is one of the oldest and best cutting oils, but is another one of those that can no longer be found.

I've heard good things about bacon grease. if you don't mind dogs and bears being obsessed with the finished work.

drewsifer714

Well-known member

Lard oil is one of the oldest and best cutting oils, but is another one of those that can no longer be found.

Around here you can get solid lard at the butcher, or sometimes at the grocery, near the Mexican food for some reason.

Ign

Well-known member

I like the Union Butterfield stuff. It's thick and stays in place especially when doing vertical work.

Yeah this stuff is awesome but kinda hard to find and/or not cheap.

I use Tap Magic for tapping lots of holes, cutting oil for drilling and tapping a few holes. I also use the cinnamon scented Tap Magic (I think is the manufacturer) specifically for Al if working a lot of Al

CarBikeGuy70

Well-known member

Cutting oil found in the plumbing dept. of big box store or the Butterfield product will be fine. Good tooling, feed rate, pressure and correct fluid will make drilling and tapping easy. My father was in the screw machine industry - they bought all their oils in 55 gal. drums. I can guarantee his shop produced several million machined parts from various metals over the years. He always said following the basic rules of machining made for less rejects. Then again tool design, set up and a good operator are equally important.

1500hd

Well-known member

Walters stainlesscut is the only lube I use. The stuff is magic, you can have a slightly dull bit apply some lube and you will have 1 long spiral chip.

ATC

Well-known member

I think everyone above has got you covered. I use leftover motor oil or gear lube. It's usually all over the shop and "free".

CR888

Well-known member

kctyphoon

Banned

PugetDude

lakeroadster

Well-known member

CGT80

Well-known member

I use the Norseman Ultra S/P mainly for tapping but sometimes drilling. Very good stuff.
https://www.harryepstein.com/index.php/ultra-lube-metal-cutting-lubricant.html

Rustlik is a water mixable cutting fluid, ratios can vary but it was decent stuff.
https://www.zoro.com/rustlick-coolant-1-gal-bottle-75014/i/G1114102/

This is exactly what I would recommend!

I'm not convinced the lube is as important as cooling the bit is.

For tapping or drilling somewhat dry, I will use the Norseman stuff. If is awesome for tapping, even power tapping. It is sticky and a bit of a pain to clean up.

Water soluble cutting fluid cleans up easily and can be used in a spray bottle for hand drilling or in an inexpensive mist cooler on the milling machine or lathe for various cutting processes. It is easy to blow it off with compressed air or use a rag and move on. Parts don't rust as easily as if you use plain water.

If you use a few drops of oil when drilling, but the bit still gets very hot, what good is it? For me, coolant makes my bits last longer than using oil. Norseman/viking bits are my favorite and the magnum bits have flats to not slip in a hand drill and have a 135 degree angle designed for hard materials, so this also helps the bits to last longer and work better than others.

WD-40 is a pretty poor lubricant in my opinion, get some real cutting fluid and you'll be happier for it.

This will help you get a feel for how the prisms can be manipulated and how they interact with each other. **Mastering the basic formations** is essential before moving on to more complex shapes. As you become more comfortable with the basic formations, challenge yourself to create more intricate designs. **Experiment with combining different formations** to create unique shapes and figures. This can be a great way to showcase your creativity and problem-solving skills. Don't be afraid to think outside the box and try unconventional designs. One important tip to keep in mind while playing with the Cubidi magic snake is to be patient. It may take some time and practice to fully understand how to manipulate the prisms effectively. **Take your time and relax**, as rushing through the game may lead to frustration. Additionally, don't hesitate to seek inspiration or guidance from others. There are numerous online tutorials and videos available that demonstrate advanced techniques and creative designs. Watching these resources can provide you with new ideas and help you improve your skills. Lastly, remember to **have fun**! The Cubidi magic snake is not only a challenging puzzle toy but also a source of entertainment and creativity. Enjoy the process of exploring different shapes and formations, and **let your imagination run wild**. Embrace the joy of discovering new possibilities with this fascinating game. In conclusion, playing with the Cubidi magic snake requires practice, patience, and creativity. By mastering the basic formations, experimenting with different shapes, and staying patient and open-minded, you can enhance your skills and truly enjoy this captivating puzzle toy. So, let the Cubidi magic snake inspire you and have a great time playing!.

Reviews for "How to Keep the Cubidi Magic Snake in Perfect Condition: Tips for Maintenance and Cleaning"

- John Doe - 1 star

I was really disappointed with Cubidi magic snake playing tips. The tips were poorly written and did not provide any useful information or strategies for playing the game. I was hoping to learn some new techniques to improve my skills, but all I got was generic advice that I could have easily found online for free. Overall, the product was a waste of my money, and I would not recommend it to anyone.

- Emily Smith - 2 stars

I purchased Cubidi magic snake playing tips hoping that it would help me master the game. However, I found the tips to be confusing and not well-explained. The instructions were vague, and I struggled to understand what I was supposed to do. Additionally, some of the tips contradicted each other, leaving me even more confused. I think the product lacks clarity and could use more detailed explanations to be truly helpful.

- Sarah Johnson - 1 star

I was highly disappointed with Cubidi magic snake playing tips. The tips provided were not helpful at all and did not enhance my gaming experience. I found myself struggling to understand the instructions and was left feeling frustrated and discouraged. The tips felt like they were written in a hurry without much thought put into them. I regret purchasing this product and would not recommend it to anyone looking to improve their skills in the game.

- Michael Thompson - 2 stars

I had high hopes for Cubidi magic snake playing tips, but unfortunately, it fell short of my expectations. The tips provided were too basic and didn't offer any insights or strategies that I hadn't already figured out on my own. I was hoping for more advanced techniques to take my gameplay to the next level, but this product didn't deliver. It may be helpful for absolute beginners, but anyone with some experience in the game will find it lacking.

Unlocking the Secrets of the Cubidi Magic Snake: Tips for Mastering the Art of Flexibility